+61 406 700 009

How Chauffeur Drivers Apply for an LDA and LVA at Melbourne Airport

31/08/2026

By Sunny Thind, working chauffeur and owner of Chauffeur Link Melbourne. Sunny has worked in the chauffeur industry since 2006, and Chauffeur Link Melbourne has operated since 2006.

Information checked: 31 August 2026

If you are a chauffeur or hire-car driver planning to collect passengers from Melbourne Airport, holding Victorian driver accreditation is not the end of the process.

Melbourne Airport has its own landside authorisation requirements for commercial drivers and vehicles operating at the airport. These are commonly known as:

  • LDA — Landside Driver Authority
  • LVA — Landside Vehicle Authority

The LDA is connected to the driver. The LVA is connected to the vehicle.

This distinction causes confusion for many new drivers. Some drivers obtain their Victorian commercial passenger vehicle accreditation and assume that it automatically gives them authority to operate at Melbourne Airport. It does not.

As someone who has worked as a Melbourne chauffeur for many years, I have seen drivers struggle to find the correct application page, misunderstand which authority they need or leave the application until they already have an airport booking.

This guide explains what the LDA and LVA are, where to apply and what working chauffeurs should check before collecting passengers from Melbourne Airport.

This is a practical industry guide, not legal advice. Airport procedures, fees, parking locations and application requirements can change. Always confirm the current rules directly with Melbourne Airport and Safe Transport Victoria.

LDA and LVA: the essential points

  • The LDA relates to the individual driver.
  • The LVA relates to the vehicle being used.
  • Melbourne Airport says commercial drivers and vehicles operating at the airport must be authorised.
  • Airport authority is additional to applicable Victorian CPV requirements.
  • Applications currently begin through Melbourne Airport’s online self-service process.
  • Melbourne Airport advises allowing up to 30 business days for processing.
  • A submitted application is not the same as an approved authority.
  • Drivers should check current airport instructions before every pickup.

What is a Landside Driver Authority?

A Landside Driver Authority, normally shortened to LDA, is an authority issued for an individual commercial driver operating within Melbourne Airport’s landside transport areas.

Melbourne Airport states that commercial licensed drivers, including hire-car and limousine drivers, must hold a current LDA when operating at the airport.

The LDA relates to the driver—not the vehicle.

Melbourne Airport also says VHA drivers must obtain and display their LDA while collecting passengers. Drivers may be required to show it when requested by an authorised person.

Melbourne Airport uses “VHA” in its chauffeur and hire-car access and parking guidance. Because registration and airport terminology can change, drivers should follow the wording shown on Melbourne Airport’s current page and airport signage.

An LDA should not be confused with:

  • Victorian CPV driver accreditation;
  • a Victorian driver licence;
  • an Aviation Security Identification Card;
  • airside driving authority; or
  • authority issued for a particular vehicle.

These documents and authorities serve different purposes.

What is a Landside Vehicle Authority?

A Landside Vehicle Authority, or LVA, is the Melbourne Airport authority associated with the commercial vehicle being used at the airport.

While the LDA relates to the chauffeur, the LVA relates to the car.

This means a chauffeur may have a current LDA but still need to confirm that the particular vehicle being used has the appropriate current vehicle authority.

This is particularly important for:

  • chauffeurs who drive more than one vehicle;
  • operators adding a new vehicle to their fleet;
  • subcontractors using their own vehicles;
  • relief drivers;
  • replacement vehicles; and
  • drivers borrowing or temporarily changing vehicles.

Never assume that because one company vehicle has airport authority, every other vehicle operated by that company is automatically covered.

Do chauffeurs need both an LDA and an LVA?

Melbourne Airport’s current guidance says commercial licensed drivers and their vehicles must be authorised. It describes this as holding:

  • a current Landside Driver Authority for the driver; and
  • a current Landside Vehicle Authority for the vehicle.

In practical terms, check both sides before undertaking an airport pickup:

  1. Is the chauffeur appropriately authorised?
  2. Is the particular vehicle appropriately authorised?

A driver’s authority does not replace the vehicle’s authority, and a vehicle authority does not replace the driver’s authority.

Is an LDA the same as Safe Transport Victoria accreditation?

No.

The Melbourne Airport LDA and LVA are airport-specific landside authorities. They do not replace the Victorian regulatory requirements applying to commercial passenger vehicle drivers, vehicles and booking service providers.

Depending on your role and operating structure, the wider requirements may include:

  • CPV driver accreditation;
  • CPV vehicle registration;
  • affiliation with or work through an appropriate booking service provider;
  • appropriate licensing and insurance; and
  • compliance with Victorian commercial passenger vehicle laws.

Drivers should check their current position through Safe Transport Victoria’s CPV driver-accreditation information before applying for airport access.

For the broader Victorian driver, vehicle and booking-service requirements, read our guide to how to become a chauffeur in Victoria.

Think of these as separate layers:

  • Safe Transport Victoria requirements allow you to work within Victoria’s commercial passenger vehicle industry.
  • Melbourne Airport landside authorities address your operation within Melbourne Airport’s controlled landside transport environment.

Holding one does not automatically prove that you hold the other.

Where do drivers apply for an LDA or LVA?

Melbourne Airport currently directs applicants to its online self-service application portal.

Applications available through the portal include:

  • Landside Driver Authority;
  • Landside Vehicle Authority; and
  • VH Parking Card.

Start from the Melbourne Airport Chauffeur and Hire Cars page rather than relying on an old saved application link. This helps ensure you are using Melbourne Airport’s current portal and instructions.

The airport’s public guidance says approved applicants will be notified of a collection date. Applicants collecting their authority are required to present their current driver licence.

Follow every instruction shown in the portal. The information and supporting documents requested may depend on whether you are applying as an individual driver, vehicle owner or operator.

How to start your Melbourne Airport application

  1. Confirm your Victorian driver and vehicle requirements
    Before applying for airport-specific authority, confirm that the driver and vehicle satisfy the relevant Victorian commercial passenger vehicle requirements. An LDA or LVA does not replace CPV driver accreditation or CPV vehicle registration.
  2. Open Melbourne Airport’s current Chauffeur and Hire Cars page
    Start from Melbourne Airport’s official Chauffeur and Hire Cars page. This reduces the risk of using an obsolete form, portal link or instruction.
  3. Open the official self-service portal from that page
    Follow Melbourne Airport’s current link to its online self-service portal. Register or sign in as directed by the portal.
  4. Select the authority required
    The portal currently provides applications for a Landside Driver Authority, Landside Vehicle Authority and VH Parking Card. Select the application relevant to the driver, vehicle or parking-access requirement.
  5. Complete the portal’s current requirements
    Enter the requested information and supply only the supporting material identified by the current portal. Requirements may differ for a driver, vehicle owner or operator.
  6. Review the information before submitting
    Check names, contact details, licence information, vehicle details and registration information for consistency before submission.
  7. Submit the application and allow for processing
    Melbourne Airport advises that applications can take up to 30 business days to process. Submitting an application does not mean the authority has already been approved.
  8. Wait for the approval and collection notification
    Melbourne Airport says approved applicants will be notified of a collection date.
  9. Present the required identification at collection
    Melbourne Airport’s current public guidance says applicants must present their current driver licence when collecting the authority. Check the notification for any additional current instruction.
  10. Confirm approval before undertaking pickups
    Do not treat a portal account, submitted form or acknowledgement email as final authority. Confirm that the applicable driver and vehicle authorities are current before undertaking Melbourne Airport pickups.

How long does an application take?

Melbourne Airport advises that applications can take up to 30 business days to process.

That is a maximum published processing period, not a promise that every application will take exactly that long.

Our practical advice is simple: do not wait until you have already accepted an airport pickup.

Apply early and allow time for:

  • completing the application;
  • correcting missing or inconsistent information;
  • airport processing;
  • receiving approval notification;
  • collection or activation requirements; and
  • confirming that both the driver and vehicle authorities are current.

Submitting an application does not necessarily mean you are already authorised to undertake pickups.

What should drivers prepare before applying?

Application requirements can change, so follow the current online portal rather than treating this list as a definitive document checklist.

Before starting, it is sensible to have current details available for:

  • your full legal name and contact information;
  • your Victorian driver licence;
  • your CPV driver accreditation;
  • the vehicle’s registration details;
  • the vehicle’s CPV registration;
  • your operator or booking service provider details, where requested; and
  • any other supporting document identified in the portal.

Make sure names, registration numbers and other details are entered consistently.

A small discrepancy can create delays, particularly when information on a driver licence, accreditation record, vehicle record and application does not match.

What is a VH Parking Card?

Melbourne Airport’s self-service portal also allows applications for a VH Parking Card.

The parking card is associated with access to Melbourne Airport’s designated hire-car and limousine parking arrangements. It should not be treated as a replacement for either the LDA or LVA.

Melbourne Airport provides dedicated parking areas for authorised chauffeur and hire-car operations. Applicable access fees are paid through the relevant access-card arrangement.

Parking locations, fees and traffic arrangements can change. Drivers should check the airport’s official page before each job rather than relying permanently on an old screenshot or price list.

Where can chauffeur and hire-car drivers collect passengers?

Melbourne Airport currently identifies designated VHA parking locations within its terminal car parks.

Authorised drivers may park in the appropriate designated area and enter the terminal to meet a pre-booked passenger, subject to the current parking and authority requirements.

The airport also says chauffeur and hire-car drivers are not required to use the reduced-rate designated bays. They may use public parking at the applicable standard rates.

However, commercial drivers must not use restricted public pickup lanes as if they were general chauffeur collection areas.

Always check:

  • which terminal the flight is arriving at;
  • the correct parking facility;
  • whether your authority and access card are current;
  • current airport signage;
  • construction-related traffic changes; and
  • the agreed passenger meeting point.

Airport layouts and vehicle routes can change. Current signs and official airport instructions take priority over an old routine.

Before travelling, check our current Melbourne Airport pickup information for passenger access, terminal and road-arrangement guidance.

Can a chauffeur wait at Melbourne Airport without a booking?

Melbourne Airport states that hire-car services to and from the airport must be pre-booked.

Drivers must not enter the terminal or parking areas to approach passengers, solicit work or offer an unbooked ride.

The distinction matters:

  • Waiting for a confirmed passenger booking is part of an arranged chauffeur service.
  • Approaching travellers to obtain work is not.

Professional chauffeurs should keep sufficient booking information available to identify the passenger and the pre-arranged journey if questioned.

Can drivers wait somewhere before entering the terminal car park?

Melbourne Airport currently says authorised VHA vehicles may use marked VHA bays at the Primary Taxi Holding Area, accessed from Francis Briggs Road.

The airport advises that:

  • a vehicle permit is required;
  • only bays marked for VHA use should be used;
  • space is limited; and
  • the area is not recommended for long stays.

Drivers should never assume that a roadside area, terminal forecourt or nearby business car park is an authorised waiting location.

Plan your arrival around the flight’s progress, the agreed meeting procedure and current airport access conditions.

Practical airport pickup advice from a working chauffeur

Obtaining the right authorities is only one part of delivering a professional airport transfer.

From my experience, the following habits prevent many common airport pickup problems.

Confirm the exact vehicle before the job

If your business operates several vehicles, check that the authority applies to the vehicle actually being dispatched. Do not check one car and then arrive in another.

Monitor the flight—but do not rely only on an app

Flight tracking is helpful, but terminal information and actual passenger readiness can differ from the displayed landing time.

International passengers may take additional time for immigration, baggage collection and customs. Domestic passengers may leave the terminal much faster.

Agree on the meeting arrangement

Confirm the appropriate Melbourne Airport chauffeur meeting points with the passenger before arrival.

Before arrival, the driver and passenger should know:

  • the terminal;
  • the meeting location;
  • whether the chauffeur will hold a name sign;
  • the passenger’s contact number;
  • the driver’s contact number; and
  • what to do if either party cannot locate the other.

Keep your phone available

Airport pickups often fail because the passenger and driver cannot make contact. Check that the passenger has received the driver’s details and that overseas travellers know they can connect to airport Wi-Fi.

Do not enter the paid parking area too early

Arriving early is good practice, but entering a paid terminal car park too early can create unnecessary waiting charges.

Use flight information and passenger communication to judge when to proceed from an authorised waiting area.

Recheck renewal dates

Do not rely on memory. Keep a record of the expiry dates applying to the driver, vehicle and airport access arrangements.

A calendar reminder before expiry is much safer than discovering a problem on the day of a pickup.

Common LDA and LVA mistakes

Common problems include:

  • assuming CPV accreditation automatically includes Melbourne Airport authority;
  • applying for an LDA but overlooking the vehicle’s LVA;
  • assuming one vehicle’s approval covers an entire fleet;
  • leaving the application until an airport job has already been booked;
  • entering inconsistent driver or vehicle information;
  • treating an application confirmation as final approval;
  • failing to display or carry the required authority;
  • using an unauthorised pickup area;
  • using an expired authority or parking card; and
  • relying on an old airport map, fee or application link.

A short compliance check before accepting airport work can prevent a much larger operational problem later.

LDA and LVA checklist for Melbourne chauffeurs

Before undertaking a Melbourne Airport pickup, confirm:

  • Your Victorian driver licence is current.
  • Your CPV driver accreditation is current.
  • The vehicle’s CPV registration is current.
  • Your Melbourne Airport LDA is current.
  • The vehicle’s Melbourne Airport LVA is current.
  • Any required parking or access card is active.
  • The journey is pre-booked.
  • You know the passenger’s flight and terminal.
  • The meeting point has been communicated.
  • You have checked current airport access and parking information.
  • The vehicle being dispatched is the vehicle you checked.

Frequently asked questions

Does every chauffeur need an LDA at Melbourne Airport?

Melbourne Airport says VHA drivers collecting passengers must obtain and display a current Landside Driver Authority.

Does every chauffeur vehicle need an LVA?

Melbourne Airport states that commercial drivers and their vehicles must be authorised. The LVA is the authority connected to the vehicle being used.

Can I use my LDA with another vehicle?

Your LDA relates to you as the driver, but the other vehicle must have its own appropriate current vehicle authority. Do not assume your driver authority covers any vehicle you choose to operate.

Is an LDA the same as CPV driver accreditation?

No. CPV driver accreditation is administered under Victoria’s commercial passenger vehicle system. The LDA is an additional Melbourne Airport landside authority.

How long does Melbourne Airport approval take?

Melbourne Airport advises that applications can take up to 30 business days to process. Apply well before you intend to undertake airport pickups.

Can I collect passengers from the public pickup lane?

Melbourne Airport says VHA drivers cannot use the public pickup lane for chauffeur collections. Follow the airport’s current instructions for designated or public parking.

Can I enter the terminal to meet my passenger?

Melbourne Airport advises that vehicles may be left unattended within the designated terminal car parks, allowing drivers to meet pre-booked passengers inside the terminal. The vehicle must be parked lawfully in the appropriate area.

Can I approach passengers at the airport and offer them a ride?

No. Chauffeur and hire-car journeys must be pre-booked. Drivers must not tout or solicit passengers at the airport.

Final advice

The most important point is that the driver and vehicle are treated separately.

The chauffeur needs the appropriate driver authority. The vehicle needs the appropriate vehicle authority. Both sit alongside—not in place of—the applicable Victorian commercial passenger vehicle requirements.

Apply early, use Melbourne Airport’s current online portal and check the authority of the actual driver and vehicle before every airport pickup.

Passengers arranging a pre-booked journey can review Chauffeur Link Melbourne’s Melbourne Airport transfer information.

For the latest application instructions, processing information, parking guidance and airport contact details, visit the official Melbourne Airport Chauffeur and Hire Cars page.

For Victorian driver and vehicle requirements, consult Safe Transport Victoria.

About the author

Sunny Thind is a working chauffeur and the owner of Chauffeur Link Melbourne. He has worked in Melbourne’s chauffeur industry since 2006, and Chauffeur Link Melbourne has operated since 2006. His practical experience includes pre-booked airport transfers, terminal meet-and-greet services, flight monitoring and chauffeur operations.

This guide combines practical chauffeur experience with information published by Melbourne Airport and Safe Transport Victoria. Official requirements can change, so readers should confirm the current rules with the relevant authority.

Chauffeur Link Melbourne icon

Article By Sunny

Sunny Thind is Director of Chauffeur Link Melbourne and has worked in the chauffeur industry since 2006.

Book a Chauffeur